How to Troubleshoot Cricut Maker Stopped Mid Cut Issue
Did your Cricut Maker stopped mid cut? It can happen because of several reasons. In this guide, I will share why this can happen and what steps you can take to overcome the problem. So, read it till the end to understand everything thoroughly. But let’s first focus on why your Cricut Maker machine stopped during cut issues.
Reasons Behind Cricut Stopped Mid Cut
Find below some of the possible reasons for which Cricut stops mid-cut issues that can occur with your device.
- There is some issue with the power button.
- A problem with the project, corrupted, or something else.
- Dust or debris stabbed on the roller.
- Mat, some parts of the cutting material or blade might get stuck.
- Cutting having incorrect calculated dimensions.
- Cutting area or space is dirty.
- Outdated firmware.
- Unplugged the USB power source while the machine was performing.
- A power adapter other than the one that came with the device is used.
- Faulty wall outlet.
- Dirty or wrong cutting tools.
- The tool sensor has dirt on it.
- Malfunction with the design space.
- Invalid or inaccurate power settings.
And the list goes on.
Solutions for Cricut Maker Stopped Mid-Cut Issues
Find the solutions below based on why your Cricut maker stopped cutting in the middle of the project.
Faults in the Power Button
A faulty power button can be unresponsive and blinks consistently red. In this situation, you can replace the power button with a new one.
Corrupted Project
When the issue is due to one corrupted project, all you need to do is re-create another.
Dust or Debris Accumulated on the Roller Bar
First, move ahead by switching the power off. Move the carriage across the roller bar 3-4 times manually to clear out any accumulated debris.
Sticking of Mat, Cutting Material, or Blade
Please note that if this happens with every machine, there are issues with your Cricut maker machine. You can try these steps.
First, power off your machine and move the carriage back and forth. Make sure to do it at least six times. After this, power your device again and try to use it for the project.
Cutting Tool Having Incorrect Calculator Dimensions
Cricut users can cut thicker materials like balsa wood and leather with a Knife blade. If the blade is encountering an issue while cutting material with thickness or density, you will see your machine not performing, which can lead to a blinking red light in the device.
Cutting Space or Area is Dirty
Before beginning the project, be sure to clear any debris. If you have issues in the middle of your project, check for any dirt and remove it by following the onscreen instructions. Once you are sure there is no debris, press the cut button again, and you can resume the cut then.
Outdated Firmware
When you find a solid red power button with loadout white, you need to proceed by doing a firmware update first. To check whether a firmware update is required, you can connect your device via Bluetooth or USB to a computer/laptop; they will tell you if an update is available for your machine. It should be your job to check that there is an Internet connection. You can’t download the update correctly without an active Internet connection. It would help if you tried another outlet or power strip for a solid red power button.
Unplugged USB Power Source While the Machine is Performing
Machine mats or materials can cause this problem. To avoid these issues, make sure to position your power and USB cables away from the material/mat’s path.
Foreign Power Adapter being Used On the Device
The adapter for the Cricut maker is white; if it is green, there is a chance foreign/divergent power adapter is being used on the device. Make sure to use the Cricut power adapter and cord that came with your device.
Faulty Wall Outlet
Proceed by trying to plug the power cord into a different wall outlet in this situation. For error-free performance, try to plug the plug directly into a wall outlet instead of plugging it into a power strip or surge protector. Moreover, you can proceed with the replacement of the power adapter and cord too.
Problems with The Program Detecting the Blade Tool
First, check that the tool installed in clamp B matches the tool recommended in the Design space on the load step. You can select Edit tools to choose a different tool if the recommended one is unavailable.
Dirty Cutting Tool
First, ensure the tool is removed from clamp B, and the reflective surface on the housing is cleaned off to come out of the issue. Press the flashing Go button once you have reinstalled the tool in Clamp B.
Dirty Tool Sensor
In such a situation, remove the tool sensor from Clamp B to clean it. Again place the tool back into the Clamp B while ensuring the flashing Go light is on.
Faulty Blade/Cutting Tool
Use a different adaptive tool – knife blade, rotary blade, or scoring wheel to attempt a test. If your test is successful, there might be an issue with the drive housing of the original tool.
Design Space Malfunction
To resolve the issue instantly, follow the steps below.
- Uninstall Design Space and then restart your computer/device. Reboot your Cricut Maker.
- Finally, reinstall Design Space and begin with your project.
Incompatible Materials with Design or Cutting tool
Try cutting different materials, such as printed paper, with its appropriate setting. If you don’t get some outcome, there might be an issue with the input (the material you’re trying to cut).
Summing Up
Above all, we have discussed various troubleshooting solutions based on your specific situation. Therefore, if you are encountering Cricut maker stopped mid cut issue, You can find the above write-up worthwhile. In addition, we have also summed up some of the most common questions asked by Cricut users. This will give you a clear understanding.
Frequently Asked Questions
Why is My Cricut Machine Turning Off in the Middle of a Cut?
Building static electricity while cutting foil, metal sheets, or smart materials can suddenly turn the machine off.
What to do when Cricut Stocks on Cut in Progress?
In such a situation, turn the Cricut off and then allow it to rest for around 10 minutes each hour. You can use a different cartridge. You can contact the technical team for assistance if your Cricut machine doesn’t freeze during cutting with another cartridge.
How to do a Hard Reset on Cricut Maker?
If you need to perform a hard reset on the Cricut maker, perform the steps below.
- First, power off your Cricut imagine machine.
- Make sure to hold down the button below the Menu and the button directly above the Menu and power them all at the same time. Keep in mind to hold them until you get to see a rainbow screen.
Visit: Cricut.com/setup
www.cricut.com/setup
cricut setup
setup cricut machine
Comments
Post a Comment